Lucent Technologies 6400 Series User Manual page 26

Leave Word Calling (LWC)
2. Dial the extension.
Message light goes on at the called telephone (if so equipped).
3. Hang up.
To cancel a Leave Word Calling message
Note: You cannot cancel a message left for an AUDIX subscriber.
1. While on-hook or off-hook, press the Menu button and then press the
softkey below CnLWC.
If CnLWC is not available on your display, press the
button
(while on-hook or off-hook)
OR, Dial the Leave Word Calling cancel code ________
(while off-hook). [dial tone]
2. Dial the extension.
Note: If reorder tone is heard, the message is not canceled; try again.
Priority Calling
The Priority Calling feature allows you to place an internal call with a
distinctive ring (usually a 3-burst ring) to indicate your call requires
immediate attention.
To place a priority call
1. If you are using a telephone with a display, press the Menu button
and then press the softkey below PCall.
If your telephone does not have a display or if PCall is not available
on your display, press the
OR, Dial the Priority Calling access code __________.
2. Dial the extension.
Wait for the called party to answer.
Note: If your call is not answered and you wish to redirect it to
coverage, press the
To change a regular call into a priority call (when you hear a call
waiting ringback tone)
1. If you are using a telephone with a display, press the Menu button
and then press the softkey below PCall.
If your telephone does not have a display or if PCall is not available
on your display, press the
(continued)
[confirmation tone]
[confirmation tone]
button (if administered)
Priority
[confirmation tone]
Go to Cvr
button.
Priority
22
Cancel LWC
button while the call is ringing.
continued on next page
[dial tone]