Lucent Technologies 6400 Series User Manual page 29

Self-Administration
Note: If there is already a feature programmed on that button, you see the
following screen:
if you want to replace the current feature on that button, press either
of the softkeys below Replace. (The display returns to the first
SELECT FEATURE screen.)
If you want to keep the feature on that button, press the softkey
below Keep.The display confirms the button has not been changed.
If you want to delete the feature from the button and leave that
button blank, press the softkey below Delete.
5. When you see the "BUTTON PROGRAMMED!" screen on the
display, do one of the following:
— If you want to administer another button on your telephone, press
the softkey below Cont (Continue) on the second line of the
"BUTTON PROGRAMMED" screen. The display returns to the
feature list. Repeat Steps 3 and 4 to administer other buttons.
— To end self-administration and return to Normal call-handling mode,
press the Exit button.
Note: Be sure to write the name of the self-administered feature(s) on the
appropriate button on the telephone button designation cards.
Send All Calls
Temporarily sends all your calls to the extension of a person designated by
your system manager to answer them when you cannot (perhaps a
secretary or receptionist).
To send all calls (except priority calls) immediately to coverage (if
your system manager has provided a coverage path for your
extension)
1. If you are using a telephone with a display, press the Menu button
and then press the softkey below SAC (while on-hook).
If your telephone does not have a display or if SAC is not available on
your display, press the
OR, Dial the Send All Calls access code __________
(while on-hook).
Note: You may hear a ring-ping (half-ring) tone from your telephone
as each call is forwarded.
(continued)
XXXXX FEATURE ON BUTTON
Replace Keep
Send Calls
[confirmation tone]
25
Delete
button (while on-hook)
continued on next page