Lucent Technologies 6400 Series User Manual page 22

Automatic Callback
The Automatic Callback feature sends you a priority ring indicating a
previously busy or unanswered extension you dialed is now available.
To automatically place another call to an extension that was busy, did
not answer, or returned call waiting ringback tone
1. If you are using a telephone with a display, press the Menu button
and then press the softkey below AutCB during call attempt.
If your telephone does not have a display or if AutCB is not available
on your display, press the
the call attempt.
Note: If you send your calls to coverage after activating Automatic
Callback, your callback calls will still ring at your extension and
will not be redirected to coverage.
2. Hang up.
You will get a priority ring when both you and the called extension
are idle; when you answer, regular ringing is sent to the called party.
3. Lift the handset when you hear priority ring.
Note: Automatic Callback is automatically canceled after 30 minutes.
To cancel Automatic Callback
1. If you are using a telephone with a display, press the Menu button
and then press the softkey below AutCb again (while on-hook).
If your telephone does not have a display or if AutCB is not available
on your display, press the
Call Forwarding All Calls
The Call Forwarding feature temporarily forwards all your calls to another
extension or to an outside number, depending on your system.
To temporarily redirect all calls to an extension or outside number of
your choice
1. If you are using a telephone with a display, press the Menu button
and then press the softkey below CFrwd (while on-hook or off-hook).
If your telephone does not have a display or if CFrwd is not available
on your display, press the
hook or off-hook)
OR, Dial the Call Forward access code __________
(while off-hook).
AutoCallBk
AutoCallBk
button (if administered) (while on-
Call Fwd
[dial tone]
18
button (if administered) during
button again (while on-hook).
continued on next page