Fox Extenders Control Program; Installing The Software - Extron electronics FOX T USW 103 User Manual

Three input universal switcher with an integrated fiber optic transmitter
Hide thumbs Also See for FOX T USW 103:
Table of Contents

Advertisement

FOX Extenders
Control Program
The Extron FOX Extenders Control Program provides an alternate method to control
and configure the FOX T USW 103. The application provides controls to adjust device
parameters that are specific to the basic and advanced setup of the transmitter. Users can
also manage firmware and check for updates to the application. The Extron FOX Extenders
Control Program communicates with the transmitter via the Remote RS-232 port on the rear
panel Remote RS-232 and Alarm connector or front panel USB Config port. The program
is compatible with Microsoft
systems. Updates to this program can be downloaded from the Extron website
(www.extron.com). Topics in this section include:

Installing the Software

The program is contained on the Extron Software Products DVD or available for download
on the Extron website, www.extron.com.
To install the software from the DVD:
1.
2.
3.
To download the software from the website:
1.
2.
3.
4.
5.
6.
7.
Windows
®
Installing the Software
Starting the Software
Using the Software
To install the software, insert the DVD into the DVD drive. The Extron software DVD
window should appear automatically. If it does not self-start, run Launch.exe from the
DVD.
Click the
tab, scroll to the desired program, and click
Software
Follow the instructions that appear on the screen. By default, the installation creates a
folder in the Program Files directory for the FOX Extenders Control Program.
On the Extron website, click the
From the left sidebar, click the
Navigate to FOX Extenders.
Click the
link to the right of the desired device.
Download
Submit any required information to start the download. Note where the file is saved.
Open the executable (.exe) file from the save location.
Follow the instructions that appear on the screen. By default, the installation creates a
folder in the Program Files directory for the FOX Extenders Control Program.
FOX T USW 103 Universal Switcher • FOX Extender Control Program
2000, Windows XP, or later Windows operating
®
tab.
Download
link.
Software
.
Install
20

Advertisement

Table of Contents
loading

Table of Contents