Update Firmware - Extron electronics FOX T USW 103 User Manual

Master System Reset — Resets all unit settings and user settings to factory defaults.
From the menu, locate the Reset submenu and select
Tools
Figure 16. Unit System Dialog Box
Audio Gain/Atten. Reset — Resets the level of audio gain and attenuation to factory
defaults.
From the menu, locate the Reset submenu and select
Tools
Figure 17. Audio Gain and Attenuation Reset Dialog Box
Presets Reset — Is not available for the FOX T USW 103.

Update Firmware

The Update Firmware option opens the Extron Firmware Loader application. This application
is used to upload new firmware to the connected device.
NOTE: In order for the Update Firmware option to work, install the Firmware Loader
application (see Downloading Extron Firmware Loader
Update Firmware option is disabled.
To update firmware:
1. From the menu, select
Tools
opens Firmware Loader (if this application is already installed on the connected PC).
2.
Find firmware to upload to the desired device by performing one of the following
actions:
From the menu of Firmware Loader, select
File
•
.
Devices
In the Devices section of the Firmware Loader main screen, double-click the
•
field associated with the selected device.
Firmware File
The Choose Firmware File dialog box opens.
3. Browse to the device-specific firmware file that has been downloaded on your PC. Valid
firmware files have a BIN file extension (see
4. Click the button. The Choose Firmware File dialog box closes.
Open
FOX T USW 103 Universal Switcher • FOX Extender Control Program
. Alternatively, click the
Update Firmware
New Firmware for Selected
Downloading Firmware
.
Master System Reset
Audio Gain/Atten. Reset
on page 38). Otherwise, the
icon. This
New
on page 40).
.
25