Universal Switcher Control Program; Installing The Software - Extron electronics FOX SW8 User Manual

Universal Switcher Control Program

The Extron Universal Switcher Control Program, which communicates with the switcher via
the Remote port, provides an easy way to configure and operate the FOX SW8 switcher. The
program is compatible with Windows XP, Windows 2000, or higher versions.

Installing the Software

The program is contained on the Extron Software Products DVD. Install the software as
follows:
1.
2.
3.
4.
Insert the DVD into the drive. The installation program should start automatically. If it
does not self-start, run Launch.exe from the DVD.
The Extron software DVD window appears (see figure 8).
Figure 8. Software DVD Window
tab (see figure 8).
Click the
Software
Scroll to the desired program and click
Figure 9.
Software Installation
Follow the on-screen instructions. By default, the installation of the Universal Switcher
Control Program creates a
it places four icons into a group folder named
:
Switcher
Check for Universal Switcher Updates
z
Uninstall Universal Switcher
z
Universal Switcher Help
z
Universal Switcher Control Program
z
(see figure 9).
Download
C:\Program Files\Extron\UniversalSwitcher
Extron Electronics\Universal
Extron FOX SW8 • Remote Control
, and
12