Installation; Mounting The Fox T Usw 103; Rear Panel Features; Input Connectors - Extron electronics FOX T USW 103 User Manual

Installation

This section describes information for connecting and wiring the FOX T USW 103. Topics in
this section include:
•
•
•

Mounting the FOX T USW 103

The FOX T USW 103 can be mounted in a rack, under a desk, or on a tabletop (see
Mounting

Rear Panel Features

Figure 2.

Input Connectors

a
b
c
Mounting the FOX T USW 103
Rear Panel Features
Making Connections
Audio Plugs.eps
on page 38 for more mounting details).
Tip (+)
POWER
1 2
12V
0.7 A MAX
RGB/R-Y, Y, B-Y HDMI
Sleeve ( )
RCA Connector
h a
FOX T USW 103 Rear Panel Features
Tip (+)
Ring (-)
Analog video connector — Connect a video source to the female 15 HD connector,
labeled input 1.
Sleeve ( )
HDMI connectors — Connect a source device to either or both HDMI connectors,
3.5 mm Stereo Plug Connector
labeled inputs 2 and 3 (see
(balanced)
accept HDMI, DVI, or dual mode DisplayPort video sources.
Audio connector — Connect an analog audio source to the 3.5 mm TRS jack. All
three video inputs can share this audio input.
Tip (L)
Ring (R)
Sleeve ( )
3.5 mm Stereo Plug Connector
(unbalanced)
Figure 3. Wiring for Unbalanced Stereo Audio
Tx
INPUTS
3
AUDIO
HDMI
OPTICAL
b c d
Connecting HDMI Connectors
FOX T USW 103 Universal Switcher • Installation
Rx
FOX T USW 103
REMOTE
RS-232
CONTACT RS-232
OVER FIBER ALARM
Tx Rx G 1 2 1 2 3 G Tx Rx G
e f g
on page 6). They can
4