Installing Firmware With Firmware Loader - Extron electronics FOX T USW 103 User Manual

Installing Firmware with Firmware Loader

1. Open Firmware Loader to establish a connection between the computer and the device.
The Add Device... dialog box opens.
Figure 37.
2. Select FOX T USW 103 from the
3. Select the method of connection from the
4. Depending on the connection method, additional options appear. Make the appropriate
selections for the current connection method.
5.
Click
Connect
6. Click
Browse
7. On the Open window, navigate to the new firmware file, which has an .S19 extension,
and click
ATTENTION:
any other extension is not a firmware upgrade for this device and could cause the
device to stop functioning.
8. Click
Add
the Firmware Loader main window.
9. Click
Begin
10. Close Firmware Loader when the
Progress
Reset SIS commands
Add Device... Window
Device Name
.
in the New File Firmware (Optional) section.
.
Open
Valid firmware files must have the file extension .S19. A file with
. The Add Device... window closes and the device and firmware are listed in
to start the upload process.
Remaining Time
column shows , and the
100%
on page 19 for reset information).
FOX T USW 103 Universal Switcher • Reference Information
drop-down list.
drop-down list.
Connection Method
field shows
00.00.00
field shows
Status completed
, the
(see Factory
40