Bezel - HP ProLiant DL320 Generation 5p Maintenance And Service Manual

Remove the primary access panel
3.
Remove the secondary access panel (on page 28).
4.
Disconnect cables from the hard drive cage
5.
Remove the 9.5-mm optical drive assembly.
6.
Remove the interposer board and bracket.
7.
To replace the component, reverse the removal procedure.

Bezel

Power down the server (on page 27).
1.
Remove the server from the rack (on page 28).
2.
Remove all hard drive blanks
3.
Remove all hard drives
4.
("Primary access
("Cabling
("Hard drive blank" on page 29).
("Hard drive" on page 30).
panel" on page 29).
overview" on page 75).
Removal and replacement procedures 36