Table of Contents
Advertisement
WARNING:
To reduce the risk of personal injury from hot surfaces, allow the drives and the
internal system components to cool before touching them.
CAUTION:
To prevent possible server malfunction, do not mix processors of different speeds or
cache sizes.
Power down the server (on page 27).
1.
Remove the server from the rack (on page 28).
2.
Remove the primary access panel
3.
Remove the air baffle
4.
Remove the heatsink ("Heatsink" on page 44).
5.
Open the processor retaining latch and the processor socket retaining bracket.
6.
Using your fingers, remove the failed processor.
7.
To replace the component:
("Primary access
("Processor air
baffle" on page 32).
panel" on page 29).
Removal and replacement procedures 47
Advertisement
Table of Contents
