Open the processor retaining latch and the processor socket retaining bracket on the failed system
14.
board.
Using your fingers, remove the processor from the failed system board.
15.
CAUTION:
To avoid damage to the system board:
Do not touch the processor socket contacts.
•
Always install the processor socket cover after removing the processor from the socket.
•
•
Do not tilt or slide the processor when lowering the processor into the socket.
CAUTION:
To avoid damage to the processor:
Handle the processor only by the edges.
•
Do not touch the bottom of the processor, especially the contact area.
•
Remove the seven T-15 screws securing the failed system board.
16.
Removal and replacement procedures 52