Remove the protective cover from the heatsink.
2.
CAUTION:
pairs (in an "X" pattern). Do not overtighten the screws as this can damage the board,
connectors, or screws. Use the wrench supplied with the system to reduce the possibility of
overtightening the screws.
Install the heatsink.
3.
Install the air baffle
4.
Install the access panel
5.
Processor
To remove the component:
Heatsink retaining screws should be tightened or loosened in diagonally opposite
("Processor air
baffle" on page 32).
("Primary access
panel" on page 29).
Removal and replacement procedures 46