Battery - HP ProLiant DL320 Generation 5p Maintenance And Service Manual

Hp proliant dl320 generation 5p server
Hide thumbs Also See for ProLiant DL320 Generation 5p:
Table of Contents

Advertisement

Battery

If the server no longer automatically displays the correct date and time, you may need to replace the
battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING:
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is not
properly handled. To reduce the risk of personal injury:
Do not attempt to recharge the battery.
Do not expose the battery to temperatures higher than 60°C (140°F).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Replace only with the spare designated for this product.
To remove the component:
Power down the server (on page 27).
1.
Remove the server from the rack (on page 28).
2.
Remove the primary access panel
3.
CAUTION:
remove all AC power cords before removing or installing the expansion boards.
Remove the battery.
4.
IMPORTANT:
configuration. After replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
The computer contains an internal lithium manganese dioxide, a vanadium
("Primary access
To prevent damage to the server or expansion boards, power down the server and
Replacing the system board battery resets the system ROM to its default
panel" on page 29).
Removal and replacement procedures 57

Advertisement

Table of Contents
loading

Table of Contents