Adding An Entry To The Current Routing Table - Net2Phone MAX 410 User Manual

Net2Phone MAX 410/420/430 User Guide

4.5.2 Adding an Entry to the Current Routing Table

To add an entry to the Current Routing Table:
1. Select FXS for the interface type.
Interfaces type
FXS
VoIP
2. Enter the logical number of the port, referring to the table you prepared in Appendix D.
3. Enter the telephone or extension numbers that are to be directed to the port using the
characters in the following table:
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, *
?
~
??
Example 1: "1???" signifies any number that begins with a 1, followed by any 3 digits.
??
Example 2: "011~" signifies any number that begins with 011, followed by any number
of digits.
(The MAX 410/420/430 only uses the pound character (#) as an end-digit indicator, so it
is not needed in the call routing table.)
4. To delete an unwanted entry, simply type its index number in the Delete Entry box and
click the Delete Entry button.
NOTE: The two VoIP entries in the Current Routing Table cannot be deleted, as they are
necessary for correct operation of the Net2Phone MAX 410/420/430 system.
After the desired changes have been entered, click the Save button to save them. The unit must
then be rebooted as in Section 4.7.3, Restart System, to activate the new settings.
Section 4.5 – The Current Routing Table
Description
interface for analog telephone
interface for IP network
the characters that can input from a telephone keypad
represents any single character
represents a string of characters of any length
Page 33