The Current Routing Table - Net2Phone MAX 410 User Manual

Net2Phone MAX 410/420/430 User Guide

4.5 The Current Routing Table

Click the Routing Table Config link to access the Current Routing Table page, illustrated below.
Figure 22
The Routing Table is used to set up routing between two or more telephone extensions connected to
a single MAX's FXS ports. An entry must be added to the Current Routing Table for each extension
that must be able to receive calls from other extensions connected to the unit through an FXS port,
and only FXS ports can be configured for this function.
If a customized numbering scheme is desired, entries for each number can be added to the table.
The Current Routing Table displays the following fields for each entry:
??
an index number (Index)
??
the interface type (I/F)
??
the logical port numbers (Port)
??
the phone number to be routed (Number)
??
the truncation length (TRNC)*
??
the prefix number (Pre)*
??
the postfix number (Post)*
??
validity of the table entry*
* The items marked with an asterisk are intended for special circumstances. The items should be left
unchanged in typical applications.
Section 4.5 – The Current Routing Table
Page 31