Installation; Connectors, Indicators, And Controls - Extron electronics P/2 DA2xi MT User Manual

Installation

The Installation section describes:
•
•

Connectors, Indicators, and Controls

The front and rear panels of the P/2 DA2xi MT are described below.
1 7
7 5
Figure 2.
a
b
c
d
Connectors, Indicators, and Controls
Mounting
2 6 3
INPUT
AUDIO
6 6
GAIN/PEAK
EXT POWER (see manual)
OUT IMP
12V
0.2A MAX
ON
1 2
Front and Rear Panels
Power and Signal indicator LED — When lit green, this LED indicates that the
distribution amplifier is receiving both power and a computer signal. When lit amber, it
indicates that the distribution amplifier is receiving power but no computer signal.
Audio input connector — Plug a 3.5 mm, mini plug audio cable from the sound card
of a computer into this jack.
Video input connector — Connect the VGA-QXGA output of a computer to this
connector.
Monitor connector — Connect a local monitor to this connector.
4
MONITOR
6 7
6 8
P/2 DA2xi MT
OUTPUT
L R
P/2 DA2xi MT User Guide • Installation
6 9
2