Table of Contents
Advertisement
Installation
This section provides an overview of the installation of the DA2 HD 8K L distribution amplifier, including the front
panel and rear panel connections. Follow the links for more detailed information elsewhere in the guide.
This section provides the following information:
•
Installation Overview
•
Rear Panel Connections
•
Front Panel Features
Installation Overview
To install and set up the DA2 HD 8K L distribution amplifier, follow these instructions:
1. Mount the unit in a suitable location (see
2. Connect power to the unit.
Connect the provided 12 VDC 3.0 A power supply to the power inlet (see
ATTENTION:
•
Do not connect any external power supplies until you have read the
page 6.
•
Veuillez lire les encadrés «
externe.
3. Connect the output display devices and power them on (see
NOTES:
•
The distribution amplifier automatically reads and stores EDID from the selected display device.
•
By default, 1080p @ 60 Hz with 2‑Channel audio native resolution EDID is assigned. For other
EDID options, see
4. If configuration or control using SIS commands is required (see
connect a control PC to the rear panel LAN port (see
front panel USB port (see
5. Connect and power on the input device (see
NOTE: Secure the input and output connectors to the distribution amplifier with the provided LockIt HDMI lacing
bracket (see
Mounting
Attention
EDID Minder
figure 5
on page 9).
Securing the HDMI Connector
on page 40).
» de la page 6 avant de brancher une source d'alimentation
Connecting Output Displays
on page 11.
SIS Commands
Connecting LAN Port (Optional)
Connecting Input Source
on page 8 .
Connecting Power
on page 5).
Attention notifications
on page 7).
starting on page 28),
on page 8) or the
on page 7).
DA2 HD 8K L • Installation
on
4
Advertisement
Table of Contents
