Installation And Operation; Mounting The Units; Tabletop Use; Mounting Kits - Extron electronics DTP HD DA 4K Series User Manual

Installation and
Operation
This section of the guide describes the following topics concerned with the installation,
setup, and operation of the DTP HD DA 4K series of distribution amplifiers.
z
z
z
z
z
z

Mounting the Units

ATTENTION:
The DTP HD DA 4K series of distribution amplifiers can be placed on a table, mounted in a
rack, or mounted under a desk or table.

Tabletop Use

Attach the included rubber feet to the bottom of the unit and place it in any convenient
location.

Mounting Kits

Mount the unit using any optional compatible mounting kit listed on the Extron website
(www.extron.com), in accordance with the directions included with the kit. For rack
mounting, see "UL Rack-Mounting Guidelines" below.

UL Rack-Mounting Guidelines

The following Underwriters Laboratories (UL) requirements pertain to the installation of the
unit into a rack.
•
Mounting the Units
Front Panel Features
Rear Panel Features
Connecting the Input Source
Twisted Pair Recommendations for DTP Communication
Wiring for RS‑232 Control
• Installation and service must be performed by authorized personnel only.
• L'installation et l'entretien doivent être effectués par le personnel autorisé
uniquement.
Elevated operating ambient temperature — If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be greater
than room ambient. Therefore, consider installing the equipment in an environment
compatible with the maximum ambient temperature (TMA = +122 °F, +50 °C) specified
by Extron.
Extron DTP HD DA 4K Series • Installation and Operation 4