Installation; Installation Overview - Extron electronics DA HD 4K PLUS Series User Manual

Installation

This section provides an overview of the installation of the DA HD 4K PLUS Series
distribution amplifiers, including the front panel and rear panel connections. Follow the links
for more detailed information elsewhere in the guide.
This section provides the following information:
•
•
•

Installation Overview

To install and set up the DA HD 4K PLUS Series distribution amplifiers, follow these
instructions:
1.
2.
3.
4.
5.
Installation Overview
Rear Panel Connections
Front Panel Features
Mount the unit in a suitable location (see
Connect power to the unit:
• DA2 HD 4K PLUS — Connect the provided 12 VDC power supply to the power
inlet (see Connecting Power
ATTENTION:
• Do not connect any external power supplies until you have read the
Attention notifications
• Veuillez lire les encadrés «
brancher une source d'alimentation externe.
DA4 HD 4K PLUS and DA6 HD 4K PLUS — Connect to a 100‑240 VAC
•
(50/60 Hz) power source using the provided IEC power cord (see
on page 8).
Connect the output display devices and power them on (see
Displays on page 9).
NOTES:
The distribution amplifier automatically reads and stores EDID from the
•
selected display device.
By default, 1080p @ 60 Hz with 2‑Channel audio native resolution EDID is
•
assigned. For other EDID options, see
If configuration or control using SIS commands is required (see
starting on page 24), connect a control PC to the rear panel RS‑232, 3‑pole captive
Connecting RS-232 Control (Optional)
screw port (see
panel USB port (see Connecting to Front Panel USB Port
Connect and power on the input device (see
page 8).
NOTE: Secure the input and output connectors to the distribution amplifier with the
provided LockIt HDMI lacing bracket (see
page 9 .
Mounting on page 33).
on page 6).
on page 7.
Attention
» de la page 7 avant de
Connecting Output
EDID Minder
on page 10) or the front
on page 12).
Connecting Input Source
Securing the HDMI Connector
DA HD 4K PLUS Series • Installation
IEC power inlet
on page 19.
SIS Commands
on
on
5