Turning Power On and Off
Press power on the front panel or remote control to turn the RNG set-top on or off
(standby). When using the remote control, be sure it is in cable mode by pressing cable
before pressing power. When using the front panel please note that the front panel
buttons are touch-sensitive, so simply touch the power icon to turn on the set-top.
You can change channels in three ways:
Press channel + or – on the front panel of the RNG set-top or the remote control to
step through the channel selection.
Enter the number of the channel you wish to view using the number keys on the
Select the channel in the Interactive Program Guide.
Adjusting the Volume
Press volume + or – on the remote control to adjust the volume. When you adjust the
volume, the volume scale is displayed on the screen. Press mute on the remote control
to toggle the sound on and off.
For best audio quality when using the analog L/R (var.) volume controlled audio outputs,
use the remote control to set the RNG set-top to approximately three quarters of the
maximum volume level and then adjust the audio levels on external devices such as your
TV or A/V receiver.
When using the analog L/R (fixed) audio outputs or any of the digital audio outputs
(HDMI, IEEE-1394, optical or coaxial digital audio) adjust the audio levels on your external
device such as your TV or A/V receiver. You may also be able to program your remote to
control the volume of your TV or A/V receiver directly (refer to the remote control
Interactive Program Guide
The Interactive Program Guide displays information about TV programs and enables you
to access features such as Parental Control or Pay-Per-View. Interactive program guides
can vary with each cable service provider. Refer to the Interactive Program Guide's
instruction manual for detailed instructions.
High-Definition All-Digital Dual Tuner DVR Set-top RNG200N • User Guide
365-095-16097-x.1 This document is uncontrolled pending incorporation in a Motorola CMS