Operation; Turning Power On And Off; Changing Channels; Adjusting The Volume - Motorola DCX3220e User Manual

Operation

2

Turning Power On and Off

Press power on the remote control to turn the DCX set-top on or off (standby). Be sure
the remote control is in cable mode by pressing cable before pressing power.

Changing Channels

You can change channels in three ways:
•
Press channel + or – on the remote control to step through the channel selection.
•
Enter the number of the channel you wish to view using the number keys on the
remote control.
•
Select the channel in the Interactive Program Guide.

Adjusting the Volume

Volume adjustment is available when using the Baseband Audio Outputs. Press volume
+ or – on the remote control to adjust the volume. When you adjust the volume, the
volume scale is displayed on the screen. Press mute on the remote control to toggle the
sound on and off.
For best audio quality when using the analog L/R audio outputs, use the remote control
to set the DCX set-top to approximately three quarters of the maximum volume level and
then adjust the audio levels on external devices such as your TV or A/V receiver.

Interactive Program Guide

The Interactive Program Guide displays information about TV programs and enables you
to access features such as Parental Control or Pay-Per-View. Interactive program guides
can vary with each cable service provider. Refer to the Interactive Program Guide's
instruction manual for detailed instructions.
High-Definition Digital STB DCX3220e
365-095-23048 x.1
User Guide
B
Operation
6