Connecting Your RNG Set-top
HDMI or IEEE-1394 — HDTV and SDTV
HDMI and IEEE-1394 offer higher quality HD video than component video.
If your TV has an HDMI input, this is for both audio and video. Connect a Standard
HDMI cable to the TV and to the HDMI connector on your RNG set-top.
HDMI and IEEE-1394 outputs provide video and audio, so no separate audio
connections are required if you plan to use your TV's speakers as the primary audio
On screen graphics will not be displayed when you are using the IEEE-1394
connection on the rear panel of the RNG set-top. Refer to Section 6 for more
If your TV has a DVI input, connect a HDMI-to-DVI adapter or cable to the HDMI out
connector on the RNG set-top and the DVI HDTV connector on your TV.
Note: DVI does not provide audio. A separate audio connection must be made.
Component video (YPbPr) — HDTV and SDTV
The YPbPr connectors on your RNG set-top provide HDTV and SDTV component video.
Note: Component video does not provide audio. A separate audio connection must be
S-Video — SDTV
If a component video input is not available on your TV, use the S-Video connection.
Note: S-Video does not provide audio. A separate audio connection must be made.
Composite Video — SDTV
If an S-Video input is not available on your TV, use the composite video (video)
Note: Composite video does not provide audio. A separate audio connection must be
RF Output — SDTV
If no other input is available on your TV, the RF Output of the RNG200N set-top can be
connected to the Antenna or Cable Input on your TV. The RF Output carries both video
and audio. Set your TV to channel 3 or 4.
High-Definition All-Digital Dual Tuner DVR Set-top RNG200N • User Guide
365-095-16097-x.1 This document is uncontrolled pending incorporation in a Motorola CMS