Download Print this page

Motorola RNG200N User Manual: Connecting Hdtv — Single Connection For Video/audio

High-definition all-digital dual tuner dvr set-top.
Hide thumbs

Advertisement

Connecting Your RNG Set-top
Connecting HDTV — Single Connection for Video/Audio
Cable In
Connect an RF coaxial cable to the cable wall outlet and the CABLE IN connector on the
RNG set-top.
HDMI
If your TV has an HDMI input, this is for both audio and video if you are using the TV
speakers. Connect a Standard HDMI cable to the TV and to the HDMI connector on your
RNG set-top.
IEEE-1394
If your HDTV has an IEEE-1394 connector, you can use the IEEE-1394 for both your
video and audio connection. Connect an IEEE-1394 cable to the IEEE-1394 connector on
your HDTV and RNG set-top.
Note: On-screen graphics will not be displayed when you are using the IEEE-1394
connection on the rear panel of the RNG set-top. Refer to Section 6 for more
information.
If you have an audio/video receiver and are not using your TV's speakers, go to
Connecting Your RNG Set-top to an A/V Receiver – Audio.
High-Definition All-Digital Dual Tuner DVR Set-top RNG200N • User Guide
365-095-16097-x.1 This document is uncontrolled pending incorporation in a Motorola CMS
B
11

Advertisement

   Also See for Motorola RNG200N

   Related Manuals for Motorola RNG200N

Comments to this Manuals

Symbols: 0
Latest comments: