Table of Contents
Advertisement
2 OPERATION
Turning Power On and Off
Press POWER on the front panel or the remote control to turn the DCX
set-top on or off (standby). Be sure the remote control is in cable mode
by pressing CABLE before pressing POWER.
Changing Channels
You can change channels in three ways:
•
Press CHANNEL + or – on the remote control to step through
the channel selection.
•
Enter the number of the channel you wish to view using the
number keys on the remote control.
•
Select the channel in the Interactive Program Guide.
Adjusting the Volume
Press VOLUME + or – on the remote control to adjust the volume.
When you adjust the volume, the volume scale is displayed on the
screen. Press MUTE on the remote control to toggle the sound on and
off.
For best audio quality when using the analog L/R audio outputs, use the
remote control to set the DCX set-top to approximately three quarters
of the maximum volume level and then adjust the audio levels on
external devices such as your TV or A/V receiver.
Interactive Program Guide
The Interactive Program Guide displays information about TV programs
and enables you to access features such as Parental Control or
Pay-Per-View. Interactive program guides can vary with each cable
service provider. Refer to the Interactive Program Guide's instruction
manual for detailed instructions.
M-Card™
The M-Card is required to view cable television programs and
interactive on-demand programs. The M-Card should not be removed.
5
Advertisement
Table of Contents
