Motorola RNG200N User Manual page 39

Configuring A/V, Closed Captioning, and Other Settings
Setting
4:3 Override
Native Mode
Settings
Additional
HDMI
Settings
Closed
Captions
High-Definition All-Digital Dual Tuner DVR Set-top RNG200N • User Guide
365-095-16097-x.1 This document is uncontrolled pending incorporation in a Motorola CMS
The 4:3 Override setting allows you to select the video output format of the
RNG200N when it is tuned to a Standard-Definition program or playing back a
Standard- Definition program from the DVR. Options include 480i, 480p, Stretch,
and Off. By default, the 480i option is selected.
The options are used as follows:
• 480i—The RNG200N will present Standard-Definition programs in the Standard-
Definition 480i format (720 x 480 pixels).
• 480p—The RNG200N will present Standard-Definition programs in the Enhanced-
Definition 480p format (720 x 480 pixels).
• Stretch—The RNG200N will automatically stretch all Standard-Definition programs
to a widescreen (16:9) aspect ratio and present the video in the format designated by
the HDMI/YPbPr Output setting. Note that the Stretch option is only available when
the TV Type setting is 16:9.
• Off—The RNG200N will create a widescreen version of a Standard-Definition program
by adding black bars to the left and the right of the picture (pillarbox) and present the
video in the format designated by the HDMI/YPbPr Output setting.
Note 1: Not all televisions will support all of the available video formats. Please
consult your television's user manual for more information on format
compatibility.
Note 2: If the HDMI/YPbPr Output setting is set to either 480i or Native, the
4:3 Override feature is disabled and no longer selectable in the menu. The 4:3
Override feature is available when the HDMI/YPbPr Output setting is 1080i,
720p, or 480p.
The Native Mode Settings option allows you to customize the Native Mode
feature of the RNG200N by selecting the video formats supported by your
television. Selecting the Native Mode Settings option will present a new menu
screen with settings specific to Native Mode operation. These settings are
discussed in more detail below.
The Native Mode Settings option is only available when the HDMI/YPbPr
Output setting is set to Native. Otherwise, the Native Mode Settings option is
disabled and no longer selectable in the menu.
The Additional HDMI Settings option is available whenever an HDMI device is
connected to the RNG200N. Selecting the Additional HDMI Settings option will
present a new menu screen with settings specific to the HDMI connection.
These settings are discussed in more detail below.
If no HDMI device is connected to the RNG200N, the Additional HDMI Settings
option is disabled and no longer selectable in the menu.
The Closed Captions setting turns closed captions off or on.
When this option is set to Disabled, the RNG200N does not render (draw) closed
captions on any video output. When this option is set to Enabled, the RNG200N
will render (draw) closed captions on all video outputs if closed captions are
included within the program.
By default, the Disabled option is selected.
Description
B
30