Operation; Turning Power On And Off; Changing Channels; Adjusting The Volume - Motorola DCX700 User Manual

Operation

2

Turning Power On and Off

POWER
Press on the remote control to turn the DCX set-top on or off (standby). Be sure
the remote control is in cable mode by pressing

Changing Channels

You can change channels in three ways:
•
Press CHANNEL +
•
Enter the number of the channel you wish to view using the number keys on the
remote control.
•
Select the channel in the Interactive Program Guide.

Adjusting the Volume

VOLUME +
Press
volume, the volume scale is displayed on the screen. Press
to toggle the sound on and off.
For best audio quality when using the analog L/R audio outputs, use the remote control
to set the DCX set-top to approximately three quarters of the maximum volume level and
then adjust the audio levels on external devices such as your TV or A/V receiver.

Interactive Program Guide

The Interactive Program Guide displays information about TV programs and enables you
to access features such as Parental Control or Pay-Per-View. Interactive program guides
can vary with each cable service provider. Refer to the Interactive Program Guide's
instruction manual for detailed instructions.

M-Card™

The M-Card is required to view cable television programs and interactive on-demand
programs. The M-Card should not be removed.
DCX700 High-Definition Digital Set-Top Box • User Guide
365-095-14284 x.1
or – on the remote control to step through the channel selection.
–
or on the remote control to adjust the volume. When you adjust the
Operation
CABLE
before pressing
MUTE
on the remote control
B
POWER
.
4