Connecting An Sdtv; Connecting Your Rng Set-Top To An Sdtv - Motorola RNG200N User Manual

Connecting Your RNG Set-top

Connecting an SDTV

1. Connect the stereo audio cable to the audio L/R connectors on the RNG set-top and
the audio L/R connectors on the Standard-Definition TV (SDTV).
2. Connect an S-Video cable to the S-Video out connector on the RNG set-top and the
input S-Video on the TV.
Note: If the TV does not support S-Video connections, composite video connections may
be used in place of S-Video connection.
Note: If the TV does not support S-Video or composite video connections, use the RF out
connector on the RNG set-top. The RF connection carries video and audio.
These video connection methods do not support HD video. If you have an HDTV, see
Connecting HDTV — Single Connection for Video/Audio.

Connecting Your RNG Set-top to an SDTV

Note: S-Video and Composite video require separate audio connections.
Note: Only (1) video connection and (1) audio connection is required.
Note: Solid lines indicate optimum connections.
High-Definition All-Digital Dual Tuner DVR Set-top RNG200N • User Guide
365-095-16097-x.1 This document is uncontrolled pending incorporation in a Motorola CMS
B
18