Replacing Connections To Routing Engine Interface Ports; Replacing The Management Ethernet Cable; Figure 46: Installing A Routing Engine; Figure 47: Routing Engine Interface Ports - Juniper MX240 Hardware Manual

MX240 Ethernet Services Router Hardware Guide
user@host> show chassis routing-engine
Routing Engine status:
...
For more information about using the CLI, see the JUNOS software manuals.

Figure 46: Installing a Routing Engine

Replacing Connections to Routing Engine Interface Ports

You can connect the router to external management devices (see
Figure 47 on page 104).
To replace the cables that connect to the ports, perform the procedures described
in the following sections:
104

Replacing Connections to Routing Engine Interface Ports

Slot 0:
Current state

Figure 47: Routing Engine Interface Ports

Replacing the Management Ethernet Cable on page 105
Replacing the Console or Auxiliary Cable on page 105
Master