Focus Assist Light; Lcd Brightness - HP PhotoSmart 945 User Manual

Focus Assist Light

Sometimes in low-light situations, the camera will use the red
focus assist light on the front of the camera to aid in focusing.
This setting allows you to turn off this light (for example when
you do not want the focus assist light to distract the subject of
your picture).
1
In the Setup
select Focus Assist.
2
In the Focus Assist
highlight Auto
3
Press OK to save the setting and
return to the
NOTE
HP recommends leaving this
setting at Auto, since turning it off hinders the ability of the
camera to focus correctly in low light.

LCD Brightness

This setting lets you adjust the brightness of the Image Display.
By default, the Image Display is optimized for indoor use. You
can use this setting to increase the brightness and contrast for
better outdoor viewing.
NOTE
If you use the
overexposed when viewing it on the camera indoors.
1
In the Setup
select LCD Brightness.
2
In the LCD Brightness
select Indoor
3
Press OK to save the setting and
return to the
Chapter 6: Using the Setup Menu
menu (page 83),
sub-menu,
or Off.
Setup menu.
Outdoor
menu (page 83),
sub-menu,
or Outdoor.
Setup menu.
setting, the image may appear
85