Using Burst Mode - HP PhotoSmart 945 User Manual

Using Burst Mode

Burst allows you to take multiple still pictures in a row as
quickly as the camera possibly can. This feature is not
available for video clips.
1
Press the Timer/Burst
the active display.
2
Frame the subject and press the
down and hold it.
3
The camera takes pictures as quickly as possible and as
many as the memory buffer can hold (typically between 4
and 6) or until the
happens first).
The Image Display remains off during the burst capture, and
then after the burst pictures have been taken, each image
appears one at a time on the Image Display. If you have
Review turned off (page 86), the Image Display will stay off for
a few seconds while the camera processes the images, then it
returns to Live
NOTE
You can use the flash with
down the rate at which the pictures are taken. For the
fastest burst rate, turn off the flash, but be aware of
camera shake if the scene is dark (you might want to use a
tripod to stabilize the camera).
Chapter 2: Taking Pictures and Recording Video Clips
button until
Shutter
View.
BURST
Shutter
button is released (whichever
Burst mode, but it will slow
appears in
button all the way
Instant
35