Printing Images Using The Dock - HP PhotoSmart 945 User Manual

Printing Images Using the Dock

1
Confirm the following:
•
The dock insert that came in your camera box is attached to the
top of the camera dock (see the camera dock Setup poster).
•
The USB cable is connected between the camera dock and your
printer, and the power cable is plugged into the dock (see the
camera dock Setup poster)
•
The printer is turned on and paper is loaded in the printer.
2
Place the camera into the camera dock. The camera will turn
on automatically.
3
Press the Save/Print
on the dock, and the
menu displays on the camera. If
you already selected images to
print using the camera
button, the number of images
selected is shown in the
Setup menu. Otherwise,
or change the selections of images to print, press the
button, scroll through the images using the
use the
each image, and when satisfied with your selections, press
the Print button again to return to the
4
If all the settings in the
OK on the camera to begin printing. Or, you can change
settings in the
camera, then follow instructions on the screen to begin
printing.
NOTE
There is a print preview in the lower right-hand corner
of the Print Setup
be used for printing images. This print preview updates as
you change the settings for the
Appendix B: Camera Dock
button
Print Setup
Print
Print
Images: ALL
buttons to adjust the number of copies for
Print Setup
Print Setup menu using the arrow keys on the
screen showing the page layout that will
is displayed. To select
Print Setup
menu look correct, press
Print Size and
Print
buttons, then
menu.
Paper Size.
133