Displaying Images On A Tv - HP PhotoSmart 945 User Manual

Displaying Images on a TV

Images in your camera can easily be displayed as a slideshow
on almost any television.
NOTE
You can also use the optional HP 8881 camera dock to
do this task. See
page 129.
1
To connect the camera directly to a TV, you need an A/V
(Audio/Video) cable. The A/V cable is included in the
HP 8881 camera dock kit, or may be purchased separately
(see Purchasing Camera Accessories
2
Your camera will send either an NTSC or PAL video signal
to a TV. The NTSC format is used primarily in North
America and Japan, while the PAL format is used primarily
in Europe. This setting is made for you when you set the
language of the camera. To check the current setting or
change the video signal format, go to the
setting in the
page 89.
3
Your camera will be the source for the TV signal (just like a
VCR or a camcorder), so you must set the TV to take video
input from an external video source (your camera) instead
of the antenna or cable TV. Refer to the TV user's manual for
directions on how to do this.
Chapter 5: Unloading, Printing, and Displaying Images
Appendix B: Camera Dock
Setup menu. See
on page 126).
TV Configuration
TV Configuration
on
on
81