Camera Self-Diagnostic Tests - HP PhotoSmart 945 User Manual

Camera Self-diagnostic Tests

If you think your camera may be defective or malfunctioning in
some way, there is a diagnostic program (a set of eleven
different tests) that you can run on the camera to try to
determine the problem. The following things are tested on the
camera; Flash, LEDs (lights), Buttons, Live View, LCD Color,
Microdisplay, Audio Playback, Record Audio, Memory Card,
and SDRAM.
NOTE
The test is in English only.
1
Turn off the camera.
2
Hold in the
the camera.
3
Turn on the camera while continuing to
press on the
see a blue screen titled
DIAGNOSTICS
Display.
4
Follow the simple instructions on the Image Display to
perform the set of tests. Some tests will tell you if the camera
passed or failed, while other tests will make the camera do
something, and you must check to see if the camera did it
correctly. If any of the tests fail, note which one(s), so that
you can provide this information when you contact HP
Support. The entire set of tests takes only a few minutes to
complete.
5
To exit the diagnostic program at any point, simply turn off
the camera.
Chapter 7: Troubleshooting and Support
Flash button on the back of
Flash button. You should
CAMERA SELF-
appear on the Image
MF
113