Unloading, Printing, And Displaying Images; Unloading Images To A Computer - HP PhotoSmart 945 User Manual

Chapter 5:
Unloading, Printing, and
Displaying Images
Unloading Images to a
Computer
NOTE
You can also use the optional HP 8881 camera dock to
do this task. See
page 129.
1
Confirm the following:
•
The HP Photo & Imaging software is installed on your computer
(see Installing the Software
•
If you are using a Macintosh computer, the camera's
USB Configuration
(see USB Configuration
2
Turn off the camera.
3
Your camera came with a
special USB cable for
connecting the camera to a
computer. Connect the larger
end of that USB cable to the
computer.
4
Open the rubber door on the
side of the camera and
connect the small end of the
USB cable to the USB
connector on the camera.
Chapter 5: Unloading, Printing, and Displaying Images
Appendix B: Camera Dock
on page 20).
is set to Disk Drive
on page 88.)
on
in the Setup menu
MF
77