HP PhotoSmart 945 User Manual page 100

Problem
My image is
blurry.
100
Possible cause
The light is low
and the flash
is set to
FLASH OFF
The camera
was set to the
wrong focus
setting for the
scene.
You moved the
camera while
you took the
picture.
The camera
focused on the
wrong thing, or
was unable to
focus.
The diopter
control is out of
adjustment,
making the
image appear
blurry in the
microdisplay.
Solution
In dim light, the camera requires
a longer exposure. Use a tripod
to hold the camera steady,
improve lighting conditions, or set
.
the pop up the flash and set the
flash to
FLASH ON
Set the camera to
, or
NORMAL
and try taking the picture again
(page 36.).
Hold the camera steady as you
press the Shutter
a tripod. Watch for the
the active display (this means that
is almost impossible to hold
steady, and you must use a
tripod).
Make sure the focus brackets
turn green before taking the
picture (page 25).
Use Focus Lock
Use focus search priority
(page 37).
Adjust the diopter control so that
information overlays in the
microdisplay are more in focus
(page 19). This only affects the
focus of the microdisplay, not the
Image Display. It does not affect
the focus of the captured image.
HP Photosmart 945 User's Manual
(page 32).
MACRO
INFINITY
button or use
icon in
(page 25).
,
focus