Using Auto Focus - HP photosmart 630 series User Manual

# Icon
3
or
4

Using auto focus

The circle in the viewfinder and the two brackets in the middle
of the Live View
you are taking. (See
Using live view
button halfway down, the camera uses this focus region to
automatically measure and then lock the focus.
The AF viewfinder light turns on solid green and the focus
brackets in the
in focus and the camera can lock the focus. However, the
viewfinder light blinks green and the focus brackets in
View turn red when the camera is unable to focus.
If the viewfinder light blinks and the focus brackets turn red,
release the Shutter
and then press the
viewfinder light continues to blink and the focus brackets
continue to turn red after several tries, the lighting may be too
low, or there may not be enough contrast in the focus region.
Try using Focus Lock
NOTE
When set to
not take a picture if it cannot find focus.
30
Description
—Battery level (actual icon shown
depends on the state of your camera batteries;
see Managing batteries
—AC power when using the optional
HP AC power adapter or HP camera dock
Focus brackets (see the next section,
focus)
screen show the focus region for the picture
Using the viewfinder
on page 29.) When you press the
Live View screen turn green when the image is
button, re-frame the subject for your picture,
Shutter button halfway down again. If the
(see the next section).
Macro
on page 106)
Exposure Mode, the camera will
hp photosmart 630 series user's manual
Using auto
on page 28 and
Shutter
Live
AF