Using The Focus Brackets - HP photosmart 930 series User Manual

5
Press the Shutter
countdown appears on the Image Display. The Self-Timer
light on the front of the camera blinks slowly for 7 seconds
and then quickly for the final 3 seconds before the camera
takes the picture. If you set
Self-Timer light blinks for a few more seconds until the
second picture is taken.

Using the focus brackets

The two brackets in the middle of the viewfinder or the
View screen (see
region for the picture you are taking. When you press the
Shutter button halfway down, the camera uses this focus region
to measure and then lock the focus.
The focus brackets turn green in the
AF/ viewfinder light turns on solid green when the image is
in focus and the camera can lock the focus. However, the focus
brackets turn red and the
when the camera is unable to focus.
If the focus brackets turn red and the viewfinder light blinks,
release the Shutter
and then press the
focus brackets continue to turn red and the viewfinder light
continues to blink after several tries, the lighting may be too
low, or there may not be enough contrast in the focus region.
Try using Focus
26
button all the way down. A 10-second
Using live view
AF/
button, re-frame the subject for your picture,
Shutter button halfway down again. If the
Lock. See Using focus lock
hp photosmart 930 series user's manual
Self-Timer to
on page 28) show the focus
Live View
viewfinder light blinks green
on page 27.
On - 2 shots, the
Live
screen and the