Installing The Memory Card; Turning On Power - HP PhotoSmart 945 User Manual

NOTE
If you have rechargeable batteries, you can use the
optional HP Photosmart 8881 camera dock or the
optional HP AC power adapter to recharge the batteries
while they are in the camera. For more information about
these optional accessories, see
Accessories

Installing the Memory Card

1
With the camera turned off and
the back of the camera facing you,
open the memory card door by
sliding the door to the right.
2
Insert the memory card, making
sure that it clicks into place.
3
Close the memory card door.
To remove the memory card, turn the
camera off and open the memory
card door, then push the memory card in and it will spring
outward from the slot.

Turning on Power

Turn the camera on by sliding the
switch to the right and
ON/OFF
then releasing it.
The lens extends, the Image Display
turns on, and the Power/Memory
light turns on solid green.
NOTE
If the Power/Memory light is blinking red, the batteries
are very low, and the camera will shut down soon.
Replace or recharge the batteries, or use the optional HP
AC adapter to power the camera.
Chapter 1: Getting Started
on page 126.
Purchasing Camera
17