Using The Focus Settings - HP PhotoSmart 945 User Manual

Using the Focus Settings

The Focus
MF
between four focus settings on the
camera.
The following table describes each of the
focus range settings on the camera.
Icon Setting
None
NORMAL
MACRO
INFINITY
MF MANUAL
FOCUS
36
button lets you toggle
Description
Use when taking pictures of subjects greater
than 0.8 m (31.5 in) away. Auto focus is
limited to a range of 0.8 m (31.5 in) to
infinity. This is the default focus setting.
Use when taking close-up pictures of subjects
less than 0.8 m (31.5 in) away. In this mode,
the camera will not take a picture if it cannot
find focus (the focus brackets turn red in the
active display and an error message
appears). Auto focus has a distance range of
0.1 to 0.8 m (3.9 to 31.5 in). Zoom position
is limited to a range of wide to 3.5x.
Use when taking pictures of distant objects
and landscapes. Focus range is limited to a
small region near infinity.
Allows you to step manually through the full
focus range. Use the
adjust the focus. You can determine the focus
by observing the image in the active display
and by a meter that appears on the right side
of the active display. For more information,
see Hints on Using Manual Focus
page 37.
HP Photosmart 945 User's Manual
MF
buttons to
on