Hp Ux Rx 1600 Keyboard And Mouse Configuration; Compaq Alpha And Ibm P Server Mouse Mode Limitation; Windows 2000 And Windows 2003 Server Keyboard Limitations; Cc-Sg - Raritan Dominion KX II-101-V2 User Manual

Hide thumbs Also See for Dominion KX II-101-V2:
Table of Contents

Advertisement

Appendix D: Informational Notes

CC-SG

206

HP UX RX 1600 Keyboard and Mouse Configuration

®
If you are using an HP
connect the device to the target:
Verify you are using KX II-101-V2 firmware 2.0.20.5.6964 or higher.
Use the USB cable that is supplied with the KX II-101-V2 .
Set the Host Interface field on the Keyboard/Mouse Setup page to
USB. See
Keyboard/Mouse Setup
Verify that the Enable Absolute Mouse and Use Full Speed
checkboxes on the Port page are not selected.
Use either Intelligent or Standard Mouse mode. Do not use Absolute
Mouse mode.

Compaq Alpha and IBM P Server Mouse Mode Limitation

When connecting to either Compaq
through the KX II-101-V2, you must use Single Mouse mode. See
Working with Target Servers

Windows 2000 and Windows 2003 Server Keyboard Limitations

Due to an operating system limitation, the following keyboard
combinations do not work with a US-International keyboard layout when
using the Windows 2000
Right Alt+D
Right Alt+I
Right Alt+L
Note: Right Alt may be labeled as AltGr on keyboards that specifically
have US/International markings on the keys.

Proxy Mode and MPC

If you are using KX II in a CC-SG configuration, do not use the CC-SG
proxy mode if you are planning to use the Multi-Platform Client (MPC).
UX RX 1600 running UNIX
(on page 115).
®
Alpha servers or IBM
(on page 35).
®
operating system and Windows 2003
®
, do the following to
®
P servers
®
servers.

Advertisement

Table of Contents
loading

Table of Contents