Chapter 6: Device Management
110
LAN Interface Settings
The current parameter settings are identified in the Current LAN interface
parameters field.
Select the LAN Interface Speed & Duplex settings.
Autodetect (default option)
10 Mbps/Half - Yellow LED blinks
10 Mbps/Full - Yellow LED blinks
100 Mbps/Half - Yellow LED blinks and the green LED is always
lit
100 Mbps/Full - Yellow LED blinks and the green LED is always
lit
Half-duplex provides for communication in both directions, but
only one direction at a time (not simultaneously).
Full-duplex allows communication in both directions
simultaneously.
Note: Occasionally there are problems running at 10 Mbps in either
half or full duplex. If you are experiencing problems, please try
another speed and duplex.
See
Network Speed Settings
Select the Bandwidth Limit.
No Limit
128 Kilobit
256 Kilobit
512 Kilobit
2 Megabit
5 Megabit
10 Megabit
100 Megabit
NEED NEW SCREENSHOT
(on page 191).