Device Services; Enabling Telnet; Enabling Ssh - Raritan Dominion KX II-101-V2 User Manual

Device Services

The Device Services page allows you to configure the following
functions:

Enable SSH access

Enter the discovery port

Enable direct port access

Enable Telnet access

Configure HTTp and HTTPs settings

Configuring SNMP agents

Enabling Telnet

If you wish to use Telnet to access the KX II-101-V2, first access the KX
II-101-V2 from the CLI or a browser.
To enable Telnet:
1. Select Device Settings > Device Services and then select the Enable
TELNET Access checkbox.
2. Enter the Telnet port.
3. Click OK.
Once Telnet access is enabled, you can use it to access the KX II-101-
V2 and set up the remaining parameters.

Enabling SSH

Enable SSH access to allow administrators to access the KX II-101-V2
via the SSH v2 application.
To enable SSH access:
1. Choose Device Settings > Device Services. The Device Service
Settings page opens.
2. Select Enable SSH Access.
3. Enter the SSH Port information. The standard SSH TCP port number
is 22 but the port number can be changed to provide a higher level of
security operations.
4. Click OK.
Chapter 6: Device Management
111