Chapter 3 Working With Target Servers; Interfaces; Kx Ii-101-V2 Remote Console Interface - Raritan Dominion KX II-101-V2 User Manual

Chapter 3

Interfaces

Working with Target Servers
In This Chapter
Interfaces ................................................................................................. 35
Virtual KVM Client (VKC) ......................................................................... 44

KX II-101-V2 Remote Console Interface

The KX II-101-V2 Remote Console is a browser-based graphical user
interface that allows you to log into KVM target servers and serial targets
connected to the KX II-101-V2 and to remotely administer the KX II-101-
V2.
The KX II-101-V2 Remote Console provides a digital connection to your
connected KVM target servers. When you log into a KVM target server
using the KX II-101-V2 Remote Console, a Virtual KVM Client window
opens.
Note: If you are using Internet Explorer
issues when trying to connect to a target server. To avoid this, do the
following:
1. In Internet Explorer, click Tools > Internet Options to open the Internet
Options dialog.
2. In the "Temporary Internet files" section, click Settings. The Settings
dialog opens.
3. In the "Check for newer versions of stored pages" section, select
Automatically.
4. Click OK to apply the settings.
Enable Direct Port Access
Direct port access enables you to access the KX II-101-V2 Remote
Client without having to go through the usual login page. With direct port
access enabled, you can define an URL to navigate directly to the Port
Access page.
To enable direct port access:
1. Launch the KX II-101-V2 Remote Console.
2. Choose Device Settings > Device Services. The Device Services
page opens.
®
7, you may run into permission
35