Modifying An Existing User Group - Raritan Dominion KX II-101-V2 User Manual

Chapter 5: User Management
88
Permission Description
Note: The Admin user group has this
permission by default.
Device Settings Network settings, date/time settings, port
configuration (channel names, power
associations), event management (SNMP,
Syslog), virtual media file server setup
Diagnostics Network interface status, network statistics,
ping host, trace route to host, KX II-101-V2
diagnostics
Maintenance Backup and restore database, firmware
upgrade, factory reset, reboot
Modem Access Permission to use the modem to connect to the
KX II-101-V2device.
PC-Share Simultaneous access to the same target by
multiple users
Security SSL certificate, security settings (VM Share,
PC-Share), IP ACL
User User and group management, remote
Management authentication (LDAP/LDAPS/RADIUS), login
settings
Setting Permissions for an Individual Group
To set permissions for an individual user group:
1. Locate the group from among the groups listed. Individual groups
can be identified by the @ in the Group Name.
2. Click the Group Name. The Group page opens.
3. Select the appropriate permissions.
4. Click OK.

Modifying an Existing User Group

Note: All permissions are enabled for the Admin group and cannot be
changed.
To modify an existing user group:
1. From the Group page, change the appropriate fields and set the
appropriate permissions.