Diagnostics - Raritan Dominion KX II-101-V2 User Manual

Diagnostics

The Diagnostics menu enables you to set the logging options for different
modules of the KX II-101-V2. You should set logging options only when
instructed by a Raritan Technical Support engineer. These logging
options enable a support engineer to get the right kind of information for
debugging and troubleshooting purposes. When instructed by a support
engineer, you will be told how to set logging options and how to generate
a log file to send to Raritan technical support.
Important: Set logging options only under the supervision of a
Raritan Technical Support engineer.
Debug
The Diagnostics > Debug menu enables you to choose the Setlog
command to set logging options for the KX II-101-V2.
Setlog Command
The Setlog command enables you set the logging level for different
modules of the KX II-101-V2 and to view the current logging levels for
each module. The syntax for the setlog command is:
setlog [module <module>] [level <level>] [vflag <vflag>]
[verbose <on|off>]
Set/Get diag log level
The Setlog command options are described in the following table.
Raritan Technical Support will tell you how to configure these settings.
Command Option
module
level
vflag
Chapter 11: Command Line Interface (CLI)
Description
The module name.
The diagnostics level:
 err
 warn
 info
 debug
 trace
The type of verbose flag:
 timestamp
 module
 thread
 fileline
177