Cli Commands - Raritan Dominion KX II-101-V2 User Manual

Chapter 11: Command Line Interface (CLI)

CLI Commands

176
Command Description
help Display an overview of the CLI syntax.
quit Places the user back one level.
logout Logs out the user session.
The table below lists and describes all available CLI commands.
Command Description
config Switch to the Configuration menu.
diagnostics Switch to the diagnostics menu. See
page 177).
debug Switch to debug menu. See
help Display an overview of the CLI syntax.
history Display the current session's command line history.
interface Configure the KX II-101-V2 network interface.
ipv6_interface Set/get IPv6 network parameters.
listports Lists the port, port name, port type, port status, and port
availability. See
logout Logout of the current CLI session.
name Sets the device name. See
179).
network Displays network configuration and enables you to
configure network settings. See
quit Return to previous command.
setlog Sets device logging options. See
page 177).
top Return to the root menu.
userlist Lists the number of active users, user names, port, and
status. See
Debug
Listports Command
Name Command
Network
Setlog Command
Userlist Command (on page 180).
Diagnostics (on
(on page 177).
(on page 180).
(on page
(on page 178).
(on