Table of Contents
Advertisement
Main Menu → Alarms → Alarm History
q
Use this window to view a list of the 100 most recent alarms.
Alarms are displayed 10 at a time. Rotate the Jog to scroll
through the alarms.
Information displayed in this window is:
•
The alarms number in the list.
•
The date of the alarm (month and day).
•
The time of the alarm (hours, minutes, and seconds).
The number of the camera input in alarm.
Main Menu → Alarms → Buzzer Setup
q
Use this menu to configure the internal buzzer.
Global Buzzer: The Global Buzzer setting acts as a master On/Off
switch. Setting the Global Buzzer to OFF deactivates all buzzer
activity.
3.11 Motion Detection
Use this menu to:
•
Enable motion detection on a per camera basis.
•
Activate individual zones in a scene to respond to motion
detection.
•
Activate the on-screen motion detection indicator.
•
Set motion detection as Activity detection or Intrusion Detection.
•
Configure the motion detection parameters on a per camera basis.
Main Menu → Motion Detection → Enable/Disable Detection
q
Selecting Enable All or Disable All from this menu will activate or deactivate
motion detection on all cameras.
Selecting Individual Enable from this menu will bring up the following menu.
Individual Enable Menu
Use this menu to enable or disable motion detection on a per
camera basis. Rotate the Jog to navigate, and the Shuttle
to change the values.
0150-0257A
30
Alarm History Box
001- 02/04 18:40:32 16
002- 02/15 12:00:10 11
003- 02/28 10:10:20 08
:
:
010- 03/15 05:12:16 04
[OK]
Buzzer Setup
Global Buzzer
[CANCEL]
[OK]
Enable/Disable Detection
Setup Parameters
Setup Active Zones
Indicate Detection
Individual Enable
Enable All
Disable All
Detection Enable
Camera 01:
Enable
Camera 02: Disable
Camera 03: Enable
Camera 04: Enable
[CANCEL]
[OK]
Kalatel DVMRe-4L
:
ON
Advertisement
Table of Contents
