Recording - GE Kalatel DVMRe-4L User Manual

Searching Recorded Data
The DVMRe-4L has a powerful search interface feature that allows the user to
search for data on the internal hard disk. The user may search the data for
previous recording sessions, and alarm conditions. Because the search interface
is so dynamic, the search interface is covered in detail in a separate section of
this manual. See section 5.

2.5 Recording

To begin recording, press the Record button. Recording will be indicated by the
LED located directly above the Record button. The unit always starts recording
at the end of previously recorded data. The unit will continue recording until the
record button is pressed again, unless Record Lock is ON.
The DVMRe-4L also remembers its current record mode in the event of power loss. If the unit was
recording during a power loss, then when power is restored the unit will put itself back in that mode.
Monitor Displays During Recording
Multiscreen Live and Playback display on Monitor A and Monitor B are not affected by recording
operations.
Stop Mode
Playback Mode
0150-0257A
Monitor A
LIVE
PLAY
BACK
16
Search Button
Record Button
Monitor B
LIVE
LIVE
Kalatel DVMRe-4L