Factory Settings; Passwords - GE Kalatel DVMRe-4L User Manual

3.15 Factory Settings

Return To Factory Defaults
From the Factory Setting menu, press the Enter button. A
password box will appear. Enter the Factory Default password.
Select OK, then press the Enter button.
The unit will reboot, returning all settings (except the time and date)
to the factory defaults. Due to the large size of the hard disk, the
reboot may take several minutes.
Change Language
From the Factory Setting menu, press the Enter button. A
password box will appear. Enter the Language password. Select
OK, then press the Enter button.
A menu will appear displaying the available language selections.
Rotate the Jog to select the desired language.
Save changes and exit the menu: Press the Enter button.
Exit the menu without making changes: Press the Menu button.

3.16 Passwords

Use this feature to change the Installer, Operator or Ethernet passwords.
Changing the Installer or Operator Passwords
To change the password:
1. Highlight the password you wish to change, then press the
Enter button. A password box will appear.
2. Enter the new password using the Number buttons.
3. Highlight OK, then press the Enter button.
4. Re-enter the password.
5. Highlight OK, then press the Enter button. The user will be
prompted, indicating if the password was entered correctly
and changed.
The Ethernet Password
The Ethernet Password feature limits access to only those
users who access the unit using the password feature of
WaveReader versions 2.4 or later. When the unit is first setup,
the default is No Password Protection. Meaning, anyone
using WaveReader and accessing with an ethernet connection
can connect to the unit.
0150-0257A 37
Factory Default Password
4-Channel
Language Password
4-Channel
English
French
German
Installer Password
Operator Password
Ethernet Password
Password Box
Enter a new Install Password
----
Password Box
Enter a new Ethernet Password
----
Kalatel DVMRe-4L
4 1 1 1
1 4 1 4