Recording Capacity - GE TruVision DVR 20 User Manual

Figure 30: Camera setup screen
Table 17: Camera submenus
Submenu name
Basic Setting
Motion
Video Adjust
PTZ Setup
Copy Settings

Recording capacity

The TVR 20 allows you to view cameras over a network. Dual streaming allows high
quality video to be recorded in one stream (Stream A) and lower quality video to be
recorded in another stream (Stream B) that can be easily streamed through a narrow
bandwidth.
When selecting the frame rates, resolution, and record quality for a camera the
remaining recording capacity for the A stream (and B stream, if applicable) is shown
at the bottom of the screen. See Figure 31 on page 64.
TruVision DVR 20 User Manual
Description
Set the dual stream, resolution, record quality, frame rate, record
mode, covert, and record audio settings. See "Basic camera setup" on
page 64.
Set the motion trigger, sensitivity level, and target size settings. Also
edit masking in the motion grid See "Motion detection" on page 66
Set the on-screen video image brightness, contrast and color
settings. See "Adjusting the video image" on page 69.
Set the PTZ protocol and ID to a camera as well as presets. See "PTZ
setup" on page 70.
Select the cameras to which to copy these settings. See "Copy
camera settings" on page 71.
Copy settings do not include the camera title.
53BChapter 6: Advanced setup
63